LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT1-907 — Canister Dir - extending: %s

Description

An attempt was made to extend the canister but the state of the valves were incorrect. This could have been during a cleanout cycle or other commanded motion on the process axis.

Remedy · Remède

Ensure that the correct CC control valves are in the proper state. The pDump valve should be ON or the pPE + TRIG valves should be ON. Ensure that the pCI valve is OFF.

Related codes / Codes liés

PNT1-905Canister Dir - retracting: %sPNT1-906Low can Pressure after Fill: %sPNT1-908Zero Flow Programmed: %sPNT1-909%sHIGH Negative Canister TORQUE

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.