FANUC Alarm PNT2-003 — Reset failure
FANUC PNT2-003 (“Reset failure”): The RESET procedure has failed. First check: Correct the error, if any, and try the RESET procedure again.
Updated 2026-09-17 · LogrobotLM reference
Description
The RESET procedure has failed.
Remedy
Correct the error, if any, and try the RESET procedure again.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →