LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-228 — Asynchronous DataMonitor disabled

FANUC PNT2-228 (“Asynchronous DataMonitor disabled”): Asynchronous Data Monitoring has been disabled. First check: To re-enable, ensure that UTILITIES-Data Monitor-Data Monitor Operation is enabled.

Updated 2026-09-17 · LogrobotLM reference

Description

Asynchronous Data Monitoring has been disabled.

Remedy

To re-enable, ensure that UTILITIES-Data Monitor-Data Monitor Operation is enabled. Set SETUP-Diagnostics-Auto Sample Each Job to NO.

Related codes

PNT2-226Maximum DMON Data Files exceededPNT2-227DMON in progress, item lockedPNT2-230DMON file management disabledPNT2-231DMON file management enabled

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →