LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-231 — DMON file management enabled

FANUC PNT2-231 (“DMON file management enabled”): File management features have been enabled because the user set the SETUP:Diagnostics Max Data Files Stored value. First check: No action required if the destination data storage device has adequate space.

Updated 2026-09-17 · LogrobotLM reference

Description

File management features have been enabled because the user set the SETUP:Diagnostics Max Data Files Stored value. Data Monitor will store as many old data files as indicated.

Remedy

No action required if the destination data storage device has adequate space. To disable, set the value to 0. Refer to the FANUC PaintTool Operatior's manual, Advanced Functions chapter for more information.

Related codes

PNT2-228Asynchronous DataMonitor disabledPNT2-230DMON file management disabledPNT2-232Sample_start builtin exec failedPNT2-233Sample_end builtin exec failed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →