FANUC Alarm PNT2-326 — Robot is bypassed

Manufacturer wording — %sRobot is bypassed
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-326 (“Robot is bypassed”): The robot not bypassed input is OFF. First check: The robot not bypassed input must be ON.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →