LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-516 — Using default valve cycle data

Manufacturer wording — %sUsing default valve cycle data
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-516 (“Using default valve cycle data”): For integral color change systems only: If there is no paint in the paint lines (current color = 0) and a color change cycle is executed, the color change cycle data for the first defined valve is used. First check: None.

Updated 2026-09-17 · LogrobotLM reference

Description

For integral color change systems only: If there is no paint in the paint lines (current color = 0) and a color change cycle is executed, the color change cycle data for the first defined valve is used.

Remedy

None.

Related codes

PNT2-514Color cycle abortedPNT2-515Color Valve + PrgSol both ONPNT2-517Selected color valve not definedPNT2-518Application enable is OFF

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →