LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-524 — CC automatic cycles executing

Manufacturer wording — %sCC automatic cycles executing
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-524 (“CC automatic cycles executing”): For integral color change systems only: An indication of the color change task executing a color change cycle. First check: None.

Updated 2026-09-17 · LogrobotLM reference

Description

For integral color change systems only: An indication of the color change task executing a color change cycle.

Remedy

None.

Related codes

PNT2-518Application enable is OFFPNT2-523CC Waiting for arm to be homePNT2-525ColorEnb + PrgSol both ONPNT2-526ColorEnb + PrgAir both ON

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →