LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-525 — ColorEnb + PrgSol both ON

Manufacturer wording — %sColorEnb + PrgSol both ON
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-525 (“ColorEnb + PrgSol both ON”): For integral color change systems only: During the manual I/O testing of color change I/O the color enable output and the Purge Solvent output are not allowed to be ON at the same time. First check: Do not attempt to turn ON the outputs at the same time.

Updated 2026-09-17 · LogrobotLM reference

Description

For integral color change systems only: During the manual I/O testing of color change I/O the color enable output and the Purge Solvent output are not allowed to be ON at the same time.

Remedy

Do not attempt to turn ON the outputs at the same time.

Related codes

PNT2-523CC Waiting for arm to be homePNT2-524CC automatic cycles executingPNT2-526ColorEnb + PrgAir both ONPNT2-527Selected color valve not defined

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →