LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-613 — Cal. table adapted in tolerance

Manufacturer wording — %sCal. table adapted in tolerance
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-613 (“Cal. table adapted in tolerance”): If the applicator is disabled at the end of the job, then the table will not adapt in hybrid mode. First check: None.

Updated 2026-09-17 · LogrobotLM reference

Description

If the applicator is disabled at the end of the job, then the table will not adapt in hybrid mode.

Remedy

None.

Related codes

PNT2-606CH2:Dyn. yield > tolerance bandPNT2-612Cal. table adapted out,output upPNT2-614Dyn. yield > % tolerance bandPNT2-615Flow rate avg. error excessive

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →