LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT2-717 — %sMax.dV/dT detected

FANUC PNT2-717 (“%sMax.dV/dT detected”): A velocity change within a measured time has exceeded the maximum dV/dT setting for this turbine. First check: Check the hardware to determine if the feedback signal from the turbine is consistent.

Updated 2026-08-29 · LogrobotLM reference

Description

A velocity change within a measured time has exceeded the maximum dV/dT setting for this turbine.

Remedy · Remède

Check the hardware to determine if the feedback signal from the turbine is consistent.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT2-717 mean?
FANUC PNT2-717 (“%sMax.dV/dT detected”): A velocity change within a measured time has exceeded the maximum dV/dT setting for this turbine.
How do you troubleshoot FANUC alarm PNT2-717?
Check the hardware to determine if the feedback signal from the turbine is consistent.

Related codes / Codes liés

PNT2-710%sCruise Speed not establishedPNT2-716%sTurbine Startup Test Not CompletePNT2-718%sMax. output has speed < setpointPNT2-719%sRequested speed over valid range

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →