LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PNT2-719 — %sRequested speed over valid range

FANUC PNT2-719 (“%sRequested speed over valid range”): The requested turbine speed output command is above the range that is considered valid. First check: Adjust the turbine speed command that is used in the preset table so it is within an acceptable range.

Updated 2026-08-29 · LogrobotLM reference

Description

The requested turbine speed output command is above the range that is considered valid.

Remedy · Remède

Adjust the turbine speed command that is used in the preset table so it is within an acceptable range.

Frequently asked · Questions fréquentes

What does FANUC alarm PNT2-719 mean?
FANUC PNT2-719 (“%sRequested speed over valid range”): The requested turbine speed output command is above the range that is considered valid.
How do you troubleshoot FANUC alarm PNT2-719?
Adjust the turbine speed command that is used in the preset table so it is within an acceptable range.

Related codes / Codes liés

PNT2-717%sMax.dV/dT detectedPNT2-718%sMax. output has speed < setpointPNT2-722%sTurbine over speedPNT2-723%sTurbine under speed fault

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →