LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PNT2-767 — Calibration aborted

Manufacturer wording — %sCalibration aborted
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PNT2-767 (“Calibration aborted”): The IPC auto calibration aborted. First check: Ensure pumps are operating correctly.

Updated 2026-09-17 · LogrobotLM reference

Description

The IPC auto calibration aborted.

Remedy

Ensure pumps are operating correctly. Ensure that the delay parameter is set to a sufficient amount.

Related codes

PNT2-765Pump 2 motor servo not readyPNT2-766Pump 2 totals differ > tolerancePNT2-768Non-increasing cal tablePNT2-769Zero PSI

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →