LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PRIO-167 — WARN CNET Vend ID/Prod. Code Mismatch

FANUC PRIO-167 (“WARN CNET Vend ID/Prod. Code Mismatch”): The vendor ID of the device in the scan-list and that of the actual device do not match. First check: Use correct EDS file and reconfigure the scan-list of the CNET interface on the system

Updated 2026-09-17 · LogrobotLM reference

Description

The vendor ID of the device in the scan-list and that of the actual device do not match.

Remedy

Use correct EDS file and reconfigure the scan-list of the CNET interface on the system

Related codes

PRIO-165WARN CNET Connection Not FoundPRIO-166WARN CNET Invalid Connection TypePRIO-168WARN CNET Invalid Connection SizePRIO-169WARN CNET Device Not Configured

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →