LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PRIO-194 — AB-RIO Failed to Start FW

FANUC PRIO-194 (“AB-RIO Failed to Start FW”): There was a problem initializing the AB-RIO hardware. First check: - z No Board : check that board is installed and dip switches are set properly.

Updated 2026-08-29 · LogrobotLM reference

Description

There was a problem initializing the AB-RIO hardware. The PRIO-191 alarm code will include a cause code with the reason.

Remedy · Remède

- z No Board : check that board is installed and dip switches are set properly.

Frequently asked · Questions fréquentes

What does FANUC alarm PRIO-194 mean?
FANUC PRIO-194 (“AB-RIO Failed to Start FW”): There was a problem initializing the AB-RIO hardware. The PRIO-191 alarm code will include a cause code with the reason.
How do you troubleshoot FANUC alarm PRIO-194?
- z No Board : check that board is installed and dip switches are set properly.

Related codes / Codes liés

PRIO-192AB-RIO No Board FoundPRIO-193AB-RIO Failed to Load FWPRIO-195AB-RIO Failed to Clear ConfigPRIO-196AB-RIO Config Error, Slot %d

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →