LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PRIO-225 — EGD Consumer timeout - Id:…

Manufacturer wording — EGD Consumer timeout - Id:%d
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC PRIO-225 (“EGD Consumer timeout - Id:…”): The EGD Consumer timed-out while waiting for an I/O message from an EGD Producer. First check: Press RESET to clear the error.

Updated 2026-09-17 · LogrobotLM reference

Description

The EGD Consumer timed-out while waiting for an I/O message from an EGD Producer.

Remedy

Press RESET to clear the error. Check the EGD Producer device to verify that it is functioning properly. Check the EGD Consumer timeout value. Typically, the EGD timeout value should be three times the EGD Producer's interval. Refer to the Ethernet Global Data Operator's Manual for more information.

Related codes

PRIO-223EGD Producer socket errorPRIO-224EGD System ErrorPRIO-226EGD Consumer socket create errorPRIO-227EGD Consumer socket bind error

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →