FANUC Alarm PRIO-223 — EGD Producer socket error
FANUC PRIO-223 (“EGD Producer socket error”): The EGD Producer was unable to create a UDP network socket. First check: This alarm generally implies that the Ethernet or TCP/IP interface is not set up correctly.
Updated 2026-09-17 · LogrobotLM reference
Description
The EGD Producer was unable to create a UDP network socket.
Remedy
This alarm generally implies that the Ethernet or TCP/IP interface is not set up correctly. For example, if no IP address is defined, then the Ethernet/IP cannot initialize. Verify network connectivity using the ping utility (on the robot and also on the local PC).
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →