LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm PRIO-286 — FL-net Wait Frame Status

FANUC PRIO-286 (“FL-net Wait Frame Status”): My node is in the frame reception wait state because there are no other nodes in the network or my node can recognize any other nodes. First check: To start communication, add another node to the network.

Updated 2026-09-17 · LogrobotLM reference

Description

My node is in the frame reception wait state because there are no other nodes in the network or my node can recognize any other nodes.

Remedy

To start communication, add another node to the network. If my node does not recognize the other node, check whether the robot and remote communication devices are connected to the network properly and are configured correctly.

Related codes

PRIO-284FL-net Token Interval ErrorPRIO-285FL-net Init ErrorPRIO-287FL-net My Node Dupulicate No.PRIO-288FL-net My Node Leave network

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →