LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm PRIO-288 — FL-net My Node Leave network

Description

My node was disconnected from the network. The cause may be loss of power or connection. In additiona, my node may be disconnected from the network due to a another error which has occured.

Remedy · Remède

Turn the power on and check whether my node can participate in the network and check whether the cables are connected properly. Also check whether another error message has been posted. If another error message is posted, remove the cause of that error and try again.

Related codes / Codes liés

PRIO-286FL-net Wait Frame StatusPRIO-287FL-net My Node Dupulicate No.PRIO-289FL-net My Node Enter networkPRIO-290FL-net My Node Dupulicate Adr

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.