LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm SEAL-001 — WARN %s

Description

This error is d when Dispensetool encounters a problem it is unable to solve internally . This fault is almost always d by style paths which do things which were not anticipated when this software was written. The reasons for this could be: 1. The sealing path is too fast 2. The sealing instructions (SS and SE) are too close together 3. The delay and timing values specified in your sealing schedules are too large or do not make sense. 4. Your robot's CPU has failed

Remedy · Remède

Write down the exact error number and message shown. Write down exactly what your robot was doing at the time of the failure. Make sure you include: Program name, line number, robot's location in the work cell, any cell I/O or other communciation activity , and exactly what the robot was doing right before the fault occured. This fault is usually fixed by doing a COLD start. If that does not work, contact your supervisor or call the FANUC robotics Hot Line.

Related codes / Codes liés

SEAL-000ABORT Dispensetool internal errorSEAL-002STOP Flow rate update failedSEAL-003STOP Digital I/O update failed

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique.