LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-050 — WARN Shot meter not full (E…)

Manufacturer wording — WARN Shot meter not full (E%d)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SEAL-050 (“WARN Shot meter not full (E…)”): The dispenser should be full at this point, and is not. First check: Check that the dispenser is full for this operation.

Updated 2026-09-17 · LogrobotLM reference

Description

The dispenser should be full at this point, and is not.

Remedy

Check that the dispenser is full for this operation.

Related codes

SEAL-048ABORT Dispenser mode mismatch (E…)SEAL-049WARN Calibrations not complete (E…)SEAL-051WARN Both Drums are empty (E…)SEAL-052ABORT Same fault posted repeatedly (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →