FANUC Alarm SEAL-210 — WARN Nozzle under press (E…)

Manufacturer wording — WARN Nozzle under press (E%s)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SEAL-210 (“WARN Nozzle under press (E…)”): Nozzle pressure has dropped below setpoint value for more than time limit. First check: Use on-board diagnostics on the dispenser controller to verify that the nozzle pressure sensor is in order, replace sensor as required.

Updated 2026-09-17 · LogrobotLM reference

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →