LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-282 — WARN Meter Empty (E…, Mtr …)

Manufacturer wording — WARN Meter Empty (E%d, Mtr %s)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SEAL-282 (“WARN Meter Empty (E…, Mtr …)”): This warning is posted when the system detects that the meter has reached to its stroke limit during dispensing. First check: 1. Reposition the meter prior to start dispensing for the seam.

Updated 2026-09-17 · LogrobotLM reference

Description

This warning is posted when the system detects that the meter has reached to its stroke limit during dispensing. After this condition, the system automatically switches to the other meter, and continue dispensing.

Remedy

1. Reposition the meter prior to start dispensing for the seam. 2. Lower the flow rate so that it can cover the entire seam

Related codes

SEAL-280WARN Primer check failed (E…)SEAL-281WARN Felt not advanced (E…)SEAL-283WARN Both Meters EmptySEAL-284WARN Plugged Tip Detected (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →