LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-283 — WARN Both Meters Empty

FANUC SEAL-283 (“WARN Both Meters Empty”): This warning is posted when the system detects that both meters have reached to their stroke limit during dispensing. First check: 1. Increase the material supply pressure.

Updated 2026-09-17 · LogrobotLM reference

Description

This warning is posted when the system detects that both meters have reached to their stroke limit during dispensing. This situation occurs if the material supply pressure is too low. After this condition, the system automatically stops dispensing, but the robot keeps moving. Use Error table to change the severity to PAUSE if you want to pause the program with this warning.

Remedy

1. Increase the material supply pressure. 2. Lower the flow rate.

Related codes

SEAL-281WARN Felt not advanced (E…)SEAL-282WARN Meter Empty (E…, Mtr …)SEAL-284WARN Plugged Tip Detected (E…)SEAL-285WARN Premature Reload Term (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →