LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-292 — STOP Max Error table entry exceeded

FANUC SEAL-292 (“STOP Max Error table entry exceeded”): In setting up the Default error table the maximum number of error table entries ($ERRSEV_NUM) was exceeded. First check: Go into controlled start, Press MENU-0, then choose PROGRAM SETUP.

Updated 2026-09-17 · LogrobotLM reference

Description

In setting up the Default error table the maximum number of error table entries ($ERRSEV_NUM) was exceeded.

Remedy

Go into controlled start, Press MENU-0, then choose PROGRAM SETUP. Change the Error Severity Table entry to be a larger number in order to contain all default errors, and press FCTN-START (COLD). After Cold Start, go back into the Error Table setup screen and manually enter in those error that were not setup correctly.

Related codes

SEAL-290STOP Invalid call to SL__INSTSEAL-291WARN No start sealing input definedSEAL-293No SLSHELL has been loaded!!!SEAL-294WARN Style bit is out of range (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →