LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-295 — WARN I/O not assigned Eq…

Manufacturer wording — WARN I/O not assigned Eq%s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SEAL-295 (“WARN I/O not assigned Eq…”): The key dispenser input such as dispenser ready is not assigned. First check: You must set the port index and the type of the dispener input to the correct values.

Updated 2026-09-17 · LogrobotLM reference

Description

The key dispenser input such as dispenser ready is not assigned.

Remedy

You must set the port index and the type of the dispener input to the correct values. Verify that a valid value is shown on the I/O menu for the I/O port instead of

Related codes

SEAL-293No SLSHELL has been loaded!!!SEAL-294WARN Style bit is out of range (E…)SEAL-296STOP Configurable error table emptySEAL-297WARN Dispenser meter near empty (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →