LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-297 — WARN Dispenser meter near empty (E…)

Manufacturer wording — WARN Dispenser meter near empty (E%s)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SEAL-297 (“WARN Dispenser meter near empty (E…)”): This warning is posted when the system detects that the meter near empty signal is asserted during dispensing. First check: 1. Reload the meter prior to start dispensing for the seam.

Updated 2026-09-17 · LogrobotLM reference

Description

This warning is posted when the system detects that the meter near empty signal is asserted during dispensing.

Remedy

1. Reload the meter prior to start dispensing for the seam. 2. Lower the flow rate so that it can cover the entire seam

Related codes

SEAL-295WARN I/O not assigned Eq…SEAL-296STOP Configurable error table emptySEAL-298WARN … option has not been loadedSEAL-299WARN Enc Belt slip (E…, Mtr …)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →