LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-310 — IN_PROCESS OFF before DispComp

FANUC SEAL-310 (“IN_PROCESS OFF before DispComp”): The IN_PROCESS dispenser signal is OFF before the DispenseComplete communication starts. First check: Check the dispenser controller, and make sure that the dispenser is performing the I/O handshaking correctly.

Updated 2026-09-17 · LogrobotLM reference

Description

The IN_PROCESS dispenser signal is OFF before the DispenseComplete communication starts.

Remedy

Check the dispenser controller, and make sure that the dispenser is performing the I/O handshaking correctly.

Related codes

SEAL-308Fault Reset Timeout (E…)SEAL-309IN_PROCESS ON before JobSEAL-311VOL_OK ON before DispCompSEAL-312Err while Flo Meas. Bypassed (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →