LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SEAL-312 — Err while Flo Meas. Bypassed (E…)

Manufacturer wording — Err while Flo Meas. Bypassed (E%s)
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SEAL-312 (“Err while Flo Meas. Bypassed (E…)”): This is a message to indicate the error ignored while the Flow measurement bypass input is ON. First check: None.

Updated 2026-09-17 · LogrobotLM reference

Description

This is a message to indicate the error ignored while the Flow measurement bypass input is ON.

Remedy

None.

Related codes

SEAL-310IN_PROCESS OFF before DispCompSEAL-311VOL_OK ON before DispCompSEAL-313VOL_OK ON before sending style IDSEAL-314Rmt Strt/Purge req. timeout (E…)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →