LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SHAP-047 — Diameter must be > 0

FANUC SHAP-047 (“Diameter must be > 0”): The diameter must be > 0. First check: Set the value higher than 0.

Updated 2026-09-17 · LogrobotLM reference

Description

The diameter must be > 0. The value for the diameter is 0 and a shape can not be generated with this setting.

Remedy

Set the value higher than 0.

Related codes

SHAP-045Program is not of pommel typeSHAP-046Program is not of custom typeSHAP-048Diameter must be > KWSHAP-049Length must be > 0

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →