LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm SPOT-038 — WARN Stud feeders low

FANUC SPOT-038 (“WARN Stud feeders low”): The stud low detect prox switch in the feed hopper for the current Power unit has indicated First check: Refill the hopper, or, if it is not low, check the function of the prox.

Updated 2026-08-29 · LogrobotLM reference

Description

The stud low detect prox switch in the feed hopper for the current Power unit has indicated

Remedy · Remède

Refill the hopper, or, if it is not low, check the function of the prox.

Frequently asked · Questions fréquentes

What does FANUC alarm SPOT-038 mean?
FANUC SPOT-038 (“WARN Stud feeders low”): The stud low detect prox switch in the feed hopper for the current Power unit has indicated
How do you troubleshoot FANUC alarm SPOT-038?
Refill the hopper, or, if it is not low, check the function of the prox.

Related codes / Codes liés

SPOT-036PAUSE Invalid weld controller (%s defined)SPOT-037WARN No gun contactors definedSPOT-039PAUSE System air pressure below 85psiSPOT-040WARN Stud Welder Not Ready

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →