FANUC Alarm SPOT-074 — PAUSE Water flow fault-gun 1
FANUC SPOT-074 (“PAUSE Water flow fault-gun 1”): The water flow OK input is low. First check: Check the input from the weld controller, and reset as necessary.
Updated 2026-09-17 · LogrobotLM reference
Description
The water flow OK input is low.
Remedy
Check the input from the weld controller, and reset as necessary.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →