LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SPOT-215 — PAUSE X-former OK fault …-both guns

Manufacturer wording — PAUSE X-former OK fault %s-both guns
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SPOT-215 (“PAUSE X-former OK fault …-both guns”): The transformer OK input is low. First check: Check the input from the weld controller, and reset as necessary.

Updated 2026-09-17 · LogrobotLM reference

Description

The transformer OK input is low.

Remedy

Check the input from the weld controller, and reset as necessary.

Related codes

SPOT-213PAUSE Water saver OK fault …-both gunsSPOT-214PAUSE Water flow OK fault …-both gunsSPOT-216PAUSE Weld enable mismatch …-both gunsSPOT-217PAUSE Weld in process timeout …-both guns

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →