FANUC Alarm SRVO-218 — Ext.E-stop/ServoDisconnect
FANUC SRVO-218 (“Ext.E-stop/ServoDisconnect”): The external emergency stop signal or the servo disconnect signal is asserted. First check: 1. Release the external emergency stop signal and press RESET.
Updated 2026-09-17 · LogrobotLM reference
Description
The external emergency stop signal or the servo disconnect signal is asserted.
Remedy
1. Release the external emergency stop signal and press RESET. 2. If the servo disconnect signal is used, release it and press RESET.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →