LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SVGN-181 — Nominal thickness:… MinAllowable:…

Manufacturer wording — Nominal thickness:%s MinAllowable:%s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC SVGN-181 (“Nominal thickness:… MinAllowable:…”): The Measured part thickness is less than the under-thickness limit(mm). First check: See SVGN-040.

Updated 2026-09-17 · LogrobotLM reference

Description

The Measured part thickness is less than the under-thickness limit(mm). The part may be out-of-tolerance. NOTE:

Remedy

See SVGN-040.

Related codes

SVGN-179More than two groupsSVGN-180Pressure persist is canceledSVGN-182Nominal thickness:… MaxAllowable:…SVGN-201Gun index 1

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →