LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm SVGN-182 — Nominal thickness:%s MaxAllowable:%s

FANUC SVGN-182 (“Nominal thickness:%s MaxAllowable:%s”): The Measured part thickness is greater than the over-thickness limit(mm).

Updated 2026-08-29 · LogrobotLM reference

Description

The Measured part thickness is greater than the over-thickness limit(mm). The part may be out-of-tolerance. NOTE: This message displays the nominal (expected/programmed) thickness and the over-thickness (MaxAllowable) limit. See SVGN-040.

Frequently asked · Questions fréquentes

What does FANUC alarm SVGN-182 mean?
FANUC SVGN-182 (“Nominal thickness:%s MaxAllowable:%s”): The Measured part thickness is greater than the over-thickness limit(mm). The part may be out-of-tolerance. NOTE: This message displays the nominal (expected/programmed) thickness and the over-thickness (MaxAllowable) limit. See SVGN-040.

Related codes / Codes liés

SVGN-180Pressure persist is canceledSVGN-181Nominal thickness:%s MinAllowable:%sSVGN-201Gun index 1SVGN-202Gun index 2

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →