LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SYST-125 — WARN No in-cycle output defined

FANUC SYST-125 (“WARN No in-cycle output defined”): The in-cycle output, which is required with the current program selection options, has not been defined. First check: Set up an in-cycle output in the Cell Output I/O menu and restart the robot.

Updated 2026-09-17 · LogrobotLM reference

Description

The in-cycle output, which is required with the current program selection options, has not been defined.

Remedy

Set up an in-cycle output in the Cell Output I/O menu and restart the robot.

Related codes

SYST-123WARN No option output definedSYST-124WARN No decision output group definedSYST-126WARN No task-OK output definedSYST-127WARN No isolate output defined

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →