LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm SYST-127 — WARN No isolate output defined

FANUC SYST-127 (“WARN No isolate output defined”): The isolate mode output, which is required with the current program selection options, has not been defined. First check: Set up an isolate mode output in the Cell Output I/O menu and restart the robot.

Updated 2026-09-17 · LogrobotLM reference

Description

The isolate mode output, which is required with the current program selection options, has not been defined.

Remedy

Set up an isolate mode output in the Cell Output I/O menu and restart the robot.

Related codes

SYST-125WARN No in-cycle output definedSYST-126WARN No task-OK output definedSYST-128WARN No interlock output definedSYST-129WARN No manual style output defined

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →