LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm TPIF-092 — WARN Value … expected …

Manufacturer wording — WARN Value %d expected %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC TPIF-092 (“WARN Value … expected …”): The value_array that was passed to a built-in was incorrectly specified. First check: Make sure the value_array specifies the correct names for the variables and that the types expected are correct.

Updated 2026-09-17 · LogrobotLM reference

Description

The value_array that was passed to a built-in was incorrectly specified. The error line shows the index into value_array where the error occurred and the type expected by the built-in.

Remedy

Make sure the value_array specifies the correct names for the variables and that the types expected are correct.

Related codes

TPIF-090WARN This program has motion groupTPIF-091WARN PREG access errorTPIF-093WARN USER menu must be selectedTPIF-094WARN USER2 menu must be selected

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →