LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm VISN-048 — WARN Gauge not totally in image

FANUC VISN-048 (“WARN Gauge not totally in image”): The built-in routine MEAS_MUL_DIS, MEASURE_ALL, or MEASURE_DIST was called with a gauge that was not totally in the image. First check: Modify the gauge endpoints to be within the screen boundaries.

Updated 2026-08-29 · LogrobotLM reference

Description

The built-in routine MEAS_MUL_DIS, MEASURE_ALL, or MEASURE_DIST was called with a gauge that was not totally in the image.

Remedy · Remède

Modify the gauge endpoints to be within the screen boundaries.

Frequently asked · Questions fréquentes

What does FANUC alarm VISN-048 mean?
FANUC VISN-048 (“WARN Gauge not totally in image”): The built-in routine MEAS_MUL_DIS, MEASURE_ALL, or MEASURE_DIST was called with a gauge that was not totally in the image.
How do you troubleshoot FANUC alarm VISN-048?
Modify the gauge endpoints to be within the screen boundaries.

Related codes / Codes liés

VISN-046WARN Changed $WINDOW boundariesVISN-047WARN Invalid image typeVISN-049PAUSE Invalid gauge widthVISN-050PAUSE Invalid Profile configuration %d

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →