FANUC Alarm VISN-049 — PAUSE Invalid gauge width
FANUC VISN-049 (“PAUSE Invalid gauge width”): The built-in routine MEAS_MUL_DIS, MEASURE_ALL, MEASURE_DIST, or TRAIN_GAUGE was called with an invalid gauge width. First check: Modify the width.
Updated 2026-09-17 · LogrobotLM reference
Description
The built-in routine MEAS_MUL_DIS, MEASURE_ALL, MEASURE_DIST, or TRAIN_GAUGE was called with an invalid gauge width.
Remedy
Modify the width. It must be within the range 1 to 3. The width is specified in the third element of the gauge parameters, which are stored in a n array[4] of real type.
Related codes
Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →