LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm VISN-534 — PAUSE Bad laser intensity threshold

FANUC VISN-534 (“PAUSE Bad laser intensity threshold”): The laser intensity threshold must be from 0 to 255. First check: Correct the laser intensity threshold in the sensor schedule screen.

Updated 2026-09-17 · LogrobotLM reference

Description

The laser intensity threshold must be from 0 to 255.

Remedy

Correct the laser intensity threshold in the sensor schedule screen.

Related codes

VISN-532PAUSE Bad actual correction NOAVISN-533PAUSE Bad functionVISN-535PAUSE Laser int. threshold not setVISN-536PAUSE Laser power not set

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →