LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm VISN-536 — PAUSE Laser power not set

FANUC VISN-536 (“PAUSE Laser power not set”): The laser intensity threshold must be from 0 to 255. First check: Correct the laser intensity threshold in the sensor schedule screen.

Updated 2026-08-29 · LogrobotLM reference

Description

The laser intensity threshold must be from 0 to 255.

Remedy · Remède

Correct the laser intensity threshold in the sensor schedule screen.

Frequently asked · Questions fréquentes

What does FANUC alarm VISN-536 mean?
FANUC VISN-536 (“PAUSE Laser power not set”): The laser intensity threshold must be from 0 to 255.
How do you troubleshoot FANUC alarm VISN-536?
Correct the laser intensity threshold in the sensor schedule screen.

Related codes / Codes liés

VISN-534PAUSE Bad laser intensity thresholdVISN-535PAUSE Laser int. threshold not setVISN-537PAUSE Bad scanning centerVISN-538PAUSE Bad scanning range

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →