LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm VISN-535 — PAUSE Laser int. threshold not set

FANUC VISN-535 (“PAUSE Laser int. threshold not set”): The laser intensity threshold must be from 0 to 255. First check: Correct the laser intensity threshold in the sensor schedule screen.

Updated 2026-08-29 · LogrobotLM reference

Description

The laser intensity threshold must be from 0 to 255.

Remedy · Remède

Correct the laser intensity threshold in the sensor schedule screen.

Frequently asked · Questions fréquentes

What does FANUC alarm VISN-535 mean?
FANUC VISN-535 (“PAUSE Laser int. threshold not set”): The laser intensity threshold must be from 0 to 255.
How do you troubleshoot FANUC alarm VISN-535?
Correct the laser intensity threshold in the sensor schedule screen.

Related codes / Codes liés

VISN-533PAUSE Bad functionVISN-534PAUSE Bad laser intensity thresholdVISN-536PAUSE Laser power not setVISN-537PAUSE Bad scanning center

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →