LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

KUKA Error 1114 — CALIBRATION SEQUENCE NOT ALLOWED

Info

Displayed as KSS01114 on KRC4 / KRC5 controllers

KUKA 1114 (“CALIBRATION SEQUENCE NOT ALLOWED”): The prescribed calibration order was not observed (depending on the machine parameter "$SEQ_CAL"). First check: Carry out the calibration observing the prescribed order.

Updated 2026-09-09 · LogrobotLM reference

Cause

The prescribed calibration order was not observed (depending on the machine parameter "$SEQ_CAL").

Troubleshooting

Carry out the calibration observing the prescribed order.

Related codes

1111DRIFT EXECUTED1117NON-CYCLICAL TEPRO DATA NOT RELEASED1118CYCLICAL TEPRO DATA NOT RELEASED1109TEPRO DATA EXCHANGE ERROR

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →