LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

KUKA Error 1119 — WRONG TEPRO DATA TYPE

Error

Displayed as KSS01119 on KRC4 / KRC5 controllers

KUKA 1119 (“WRONG TEPRO DATA TYPE”): The SBC is cyclically sending incorrect data (TEPRO = technology process). First check: Eliminate the fault in the SBC program.

Updated 2026-09-09 · LogrobotLM reference

Cause

The SBC is cyclically sending incorrect data (TEPRO = technology process).

Effect

Stop via braking ramp. SBC interface interrupted.

Troubleshooting

Eliminate the fault in the SBC program.

Related codes

1118CYCLICAL TEPRO DATA NOT RELEASED1120INCOMPLETE COMMAND1117NON-CYCLICAL TEPRO DATA NOT RELEASED1121DATA TRANSMISSION

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →