LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

KUKA Error 1483 — VOLUME TOO LARGE

Error

Displayed as KSS01483 on KRC4 / KRC5 controllers

KUKA 1483 (“VOLUME TOO LARGE”): The volume monitoring has been triggered. First check: Check the adhesive equipment, flush if necessary.

Updated 2026-09-09 · LogrobotLM reference

Cause

The volume monitoring has been triggered. Too much adhesive has been applied. The check is performed from a PLC user program (bonding technology).

Effect

Stop via braking ramp. All active commands are inhibited.

Troubleshooting

Check the adhesive equipment, flush if necessary.

Related codes

1482VOLUME TOO SMALL1484ADHESIVE PRESSURE ERROR1481NO DATA ACCESS WITHIN THE CYCLE TIME1485OIL FILTER DIRTY

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →