LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

ABB Error 38205 — Serial Measurement Board (SMB) fault

Error

ABB 38205 (“Serial Measurement Board (SMB) fault”): SMB X-Y differential signal linearity error. Likely part: SMB (Serial Measurement Board (SMB)) +1 more.

Updated 2026-10-22 · LogrobotLM reference

What it means

SMB X-Y differential signal linearity error.

What to check

  • Check the SMB; replace the board if the error persists.
  • Note: Depending on the context, the system may still operate with a warning, but the error prevents normal operation.

Part to check / replace

ABB 38205 points to the hardware below — start here before ordering.

Tap a part for every code that points to it — and verify the exact variant for your controller before ordering.

Related codes

20032Revolution counter not updated20033Axis not synchronized38034Axis Computer / SMB / Serial measurement cable fault

Same hardware involved

38203SMB38204SMB38206SMB38207SMB

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →