LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free →

FANUC Alarm APSH-208 — Failed to check …

Manufacturer wording — Failed to check %s
The manual prints placeholders; your controller fills them in with the real group, axis or number.

FANUC APSH-208 (“Failed to check …”): This error is related to production setup check screen. First check: Press F6,REDO and cycle power to update items.

Updated 2026-09-17 · LogrobotLM reference

Description

This error is related to production setup check screen. This item should not be checked on the present configuration.

Remedy

Press F6,REDO and cycle power to update items.

Related codes

APSH-206Invalid Group SpecifiedAPSH-207Invalid Ref Pos SpecifiedAPSH-209Fault Disabled: single cycle.APSH-210Fault Disabled: multiple cycles.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. How this reference is built →