LogrobotLM

LogrobotLM — AI fault diagnosis for ABB · KUKA · FANUC robots. It reads your robot backup in your browser (never uploaded) and pinpoints the fault. Try it free → · Le diagnostic IA qui lit la sauvegarde de votre robot, sans rien téléverser.

FANUC Alarm CVIS-057 — Zero vector is used in calculation.

FANUC CVIS-057 (“Zero vector is used in calculation.”): This is an internal error found during laser measurement. First check: Please notify FANUC of the conditions (program executed, operation made, etc.) in which the error occurred.

Updated 2026-08-29 · LogrobotLM reference

Description

This is an internal error found during laser measurement.

Remedy · Remède

Please notify FANUC of the conditions (program executed, operation made, etc.) in which the error occurred.

Frequently asked · Questions fréquentes

What does FANUC alarm CVIS-057 mean?
FANUC CVIS-057 (“Zero vector is used in calculation.”): This is an internal error found during laser measurement.
How do you troubleshoot FANUC alarm CVIS-057?
Please notify FANUC of the conditions (program executed, operation made, etc.) in which the error occurred.

Related codes / Codes liés

CVIS-055Not enough laser points for calculation.CVIS-056Laser plane is not found.CVIS-058Input data is out of range.CVIS-059Leaning angle exceeded limit.

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →