FANUC Alarm CVIS-143 — The image display is in the Graphic Edit Mode.¥n (Exit mode by pressing the flashing OK or Cancel button.)

FANUC CVIS-143 (“The image display is in the Graphic Edit Mode.¥n (Exit mode by pressing the flashing OK or Cancel button.)”): An attempt was made to perform another operation while a window or mask was being set. First check: Complete the setting of the window or mask before performing another operation.

Updated 2026-08-29 · LogrobotLM reference

Description

An attempt was made to perform another operation while a window or mask was being set.

Remedy · Remède

Complete the setting of the window or mask before performing another operation.

Frequently asked · Questions fréquentes

What does FANUC alarm CVIS-143 mean?: FANUC CVIS-143 (“The image display is in the Graphic Edit Mode.¥n (Exit mode by pressing the flashing OK or Cancel button.)”): An attempt was made to perform another operation while a window or mask was being set.
How do you troubleshoot FANUC alarm CVIS-143?: Complete the setting of the window or mask before performing another operation.

Related codes / Codes liés

CVIS-141The tool name '%s' is already in use.CVIS-142The tool name must start with a letter, contain no spaces, not contain the characters ¥¥/:*?¥"<>|, and be 8 characters or less.CVIS-144The name has been truncated to '%s'.CVIS-145The image display is in live mode.¥n (Exit mode by pressing the red Snap button.)

Indicative field information — the robot manufacturer's manual and safety procedures always prevail. Never bypass a safety device; apply lockout/tagout (LOTO) before any physical intervention. · Informations indicatives issues du terrain — le manuel du constructeur et ses procédures de sécurité font foi. Ne shuntez jamais un organe de sécurité ; consignez (LOTO) avant toute intervention physique. How this reference is built →